SmartClass™ Fiber MPOLx MPO. Optical Loss Test Sets

3 Pages

The SmartClass Fiber MPOLx Power Meter supports MPO‑12 multimode and singlemode interfaces using an InGaAs detector with a wavelength range of 850 to 1550 nm. It offers calibrated settings at 850 and 1300 nm for multimode and 1310 and 1550 nm for singlemode. The measurement range is –50 to +3 dBm with a maximum input of +3 dBm, delivering accuracy of ±0.7 dB for multimode and ±0.6 dB for singlemode. It provides linearity of ±0.15 dB, 0.01 dB display resolution, and supports absolute, relative, and pass/fail measurements. Warm‑up time is 20 minutes for stable operation.

Join for free to read

Vendor Sheet SmartClass Fiber MPOLx

Vendor Sheet OLTS-85/85P SmartClass™ Fiber Optical Loss Test Sets

Vendor Sheet SmartClass. Fiber Handheld Solutions

Vendor Sheet SmartClass™ Fiber OLTS-85/85P Very Small Form Factor (VSFF)

More from VIAVI Solutions

Vendor Sheet SmartClass Fiber MPOLx

Vendor Sheet OLTS-85/85P SmartClass™ Fiber Optical Loss Test Sets

Vendor Sheet SmartClass. Fiber Handheld Solutions

Vendor Sheet SmartClass™ Fiber OLTS-85/85P Very Small Form Factor (VSFF)

Vendor Sheet

SmartClass™ Fiber MPOLx MPO. Optical Loss Test Sets

SmartClass™ Fiber MPOLx MPO. Optical Loss Test Sets

You Might Also Like

More from VIAVI Solutions